Evaporative cooler acts as an alternative to air conditioners in dry climates. With an evaporative cooler, you will lower your indoor air thus reducing waste production. The Agilis Technologies has some of the best evaporative coolers.
Due to the air moistening abilities of an Evaporative coolers, they are also known as swamp coolers as it has air-moistening abilities.
Installing an evaporative cooler
Factors to consider when installing an evaporative cooler:
- Features: Find a unit with several fan speeds and a vent only position. The functionality is based on the weather. You may also want to find one that has an air filter system to ensure that dust and pollen grains are not in the cooler.
- Size: Swamp coolers are the size of the air that can circulate in them. The sizes broadly range from 3,000 to 25,000 cubic feet per minute.
- Water exchange: To prevent water from being alkaline it is recommended that installing a bleed off the system that mixes the cooler water with fresh. This will automatically reduce maintenance of the more relaxed working. However, you will require five gallons of water in every hour.
- Location: The evaporate cooler is preferably stored outside the house. They are portable units and can be placed in windows for a distinct room cooling; they can also be installed on roofs, in attics, or on the ground at ground level using ducts in a whole building system. Evaporate coolers must have water.
Therefore, the chosen location should have a water source.
Which are further divided into two categories. Rigid pad and fiber pad coolers. Fiber pad coolers are the most public. They entail having a range of one to two inch of synthetic fiber pads and thick plastic-netted wood.
Rigid-sheet pad coolers need to have corrugated sheet material that ranges from eight to twelve inches in thickness and can have high speed going through than their counterparts the fiber pad cooler. The two-stage cooler famously referred to as n indirect cooler they use the secondary heat exchange which prevents vaporized water from going into the air. They may be more expensive than their counterparts but work very efficiently.
Factors to consider before final purchase
Evaporative coolers are conducive in an environment that has dry air. Evaporate coolers are solely dependent on the water you, therefore, need to have a constant water supply daily. If the cooler in on the roof it may damage the roof and the roofing materials which are not simple to be maintained. You also need to sustain and clean the evaporative coolers regularly.